Shenzhen ECON Technology Co.,Ltd
call us on: +8613620961024

2 phase digital microstep Stepper Drive with current under 5.6A--DH556

ECON provides tens of models of stepper drives. From 2 phase to 3 phase, DSP digital, 24--80 DC input or 24--220VAC input. The stepper drives have been used by thousands of OEM clients in the world from many of industries such as CNC machinery, medical, electronics, semiconductor, packaging, lab automation.

Product Details:

Product Introduction:2 phase digital microstep Stepper Drive with current under 5.6A

ECON provides tens of models of stepper drives. From 2 phase to 3 phase, DSP digital, 24--80 DC input or 24--80VAC input, and can provide the right stepper drives to satisfy the special needs of your stepper control systems. ECON’s stepper products are well-known because of their wide choices, excellent performance, easy to use, high reliability, and low cost. The stepper drives have been used by thousands of OEM clients in the world from many of industries such as CNC machinery, medical, electronics, semiconductor, packaging, lab automation.

The high performance DH series digital stepper drives are featured with extra low noise, very low motor heating, and ultra smooth motor movements at low speed. With performance and cost balanced

DH556 is the new generation high performance fully digital stepper drive which base on 32bit DSP with a advanced algorithm .the power supply range is DC20~50V. it can drive frame 42---86mm 2 phase stepper motor .

Ultra low noise and high smoothness at middle/low speed ,and high torque at high speed, which can be applied to different speed control applications. adopt smooth and accurate sinusoidal current vector control technology ,which make motor low heat .

Product Features:2 phase digital microstep Stepper Drive with current under 5.6A

●New generation 32bit DSP 

●Good smoothness ,low noise ,low heat 

●Build-in micro step setting 

●Build-in current setting 

●The standstill current can be set to 50%

●Opto-isolated differential pulse input 

●The response frequency is up to 300KHz

●Over voltage , under voltage, over current protection

Applications 

It can be used in various kinds of machines ,such as dispenser machine. floating machine

3D printer, labelling machine, medical machine, laser cut machine, and so on ,its unique features make it an ideal solution for the applications which require low noise ,low vibration, low heat and high precision  

Mounting dimension(unit:mm)

Product Function:2 phase digital microstep Stepper Drive with current under 5.6A

Current Setting 

Peak current(A)

RMS current  (A)

SW1

SW2

SW3

1.4

1.0

OFF

OFF

OFF

2.1

1.5

ON

OFF

OFF

2.7

1.9

OFF

ON

OFF

3.2

2.3

ON

ON

OFF

3.8

2.7

OFF

OFF

ON

4.3

3.1

ON

OFF

ON

4.9

3.5

OFF

ON

ON

5.6

4.0

ON

ON

ON

Standstill Current Setting 

SW4:OFF=Half Current

ON=Full Current

Microstep Setting 

Pul/rev

SW5

SW6

SW7

SW8

200

ON

ON

ON

ON

400

OFF

ON

ON

ON

800

ON

OFF

ON

ON

1600

OFF

OFF

ON

ON

3200

ON

ON

OFF

ON

6400

OFF

ON

OFF

ON

12800

ON

OFF

OFF

ON

25600

OFF

OFF

OFF

ON

1000

ON

ON

ON

OFF

2000

OFF

ON

ON

OFF

4000

ON

OFF

ON

OFF

5000

OFF

OFF

ON

OFF

8000

ON

ON

OFF

OFF

10000

OFF

ON

OFF

OFF

20000

ON

OFF

OFF

OFF

25000

OFF

OFF

OFF

OFF

Interface Description 

Name

Function

Description

PWR

Power light 

When power on ,the green light is on  

ALARM

Over current/under voltage/over 

voltage displaying light

If the drive Over current/under voltage/over voltage, the red light is on 

 

 

PU+

 

 

Pulse input positive 

Pulse signal: In single pulse (pulse/direction) mode, this input represents pulse signal, 

each falling edge active; 4-5V for High -level, 0-0.5V for low-level

Series connect resistors for current-limiting when +12V or +24V used.

(should connect 1k resistor for +12V,2k for +24V)

PU-

Pulse input negative

Pulse signal: In single pulse (pulse/direction) mode, this input represents pulse signal, each falling edge active; 4-5V for High -level, 0-0.5V for low-level

 

DR+

 

Direction  input positive

DIR signal: In single-pulse mode, this signal has low/high voltage levels,

representing two directions of motor rotation;

Series connect resistors for current-limiting when +12V or +24V used.

(should connect 1k resistor for +12V,2k for +24V)

DR-

Direction  input negative

DIR signal: In single-pulse mode, this signal has low/high voltage levels, 

representing two directions of motor rotation;

 

 

MF+

 

 

Enable input positive

Enable signal: This signal is used for enabling/disabling driver.

High level for enabling the driver and low level for disabling the driver. 

Usually left UNCONNECTED (ENABLED).

Series connect resistors for current-limiting when +12V or +24V used.

(should connect 1k resistor for +12V,2k for +24V)

 

MF-

 

Enable input negative

Enable signal: This signal is used for enabling/disabling driver.

High level for enabling the driver and low level for disabling the driver. 

Usually left UNCONNECTED (ENABLED).

V-

Power input COM

 

DC20-50V

V+

Power input VCC

A+,A-

Motor A phase 

Connect to   Motor A phase

B+,B-

Motor B phase 

Connect to   Motor B phase

!Note

A: Connect power supply rightly ,can’t exceed 50VDC 

B: If the control signal (PU, DR, MF ) is over 5V ,please connect resistors (at the PU+, DR+, MF+ terminals) for current-limiting.

C: If the alarm light is on ,please check it after power off

     a :the power supply range is 20V—50VDC or not ? b:is there any short on motor wire or others ?


Product Service:2 phase digital microstep Stepper Drive with current under 5.6A

ECON provide technical service from start to end,and will offer one year warranty. Any problem,can send e-mail to our technical engineer and sales,or directly chat on our website.


Payment and Delivery:2 phase digital microstep Stepper Drive with current under 5.6A

ECON supports T/T,Paypal,Western Union to make payment. We can arrange express,air and sea shipment,we have professional team to deal with logistic.


Recommendations:2 phase digital microstep Stepper Drive with current under 5.6A

Stepper Motor Nema 23 Series

Stepper Motor Nema 34 Series

Power Supply



Equipped with professional 2 Phase Stepper Drive factory, It is a leading 2 phase digital microstep stepper drive with current under 5.6a--dh556 manufacturer and supplier.

Hot Tags: 2 phase digital microstep stepper drive with current under 5.6a--dh556, manufacturer, supplier, factory
Feedback
Contact Us

Shenzhen ECON Technology Co.,Ltd

Add: 2F, Building B, Jintai Industrial Park, Hangcheng Avenue, Gushu Village, Xixiang Street, Bao'an Area, Shenzhen, Guangdong, China

Tel: +86 136 2096 1024

Email: enquiry@hybridservo.com

technical01@hybridservo.com

Copyright © Shenzhen ECON Technology Co.,Ltd