Shenzhen ECON Technology Co.,Ltd
call us on: +8613620961024
News
Home > News > Content

4 In 1 Multi Axis Hybrid Servo Drive Testing

Shenzhen ECON Technology Co.,Ltd | Updated: Nov 23, 2017

4 in 1 multi axis hybrid servo drive testing

     


blob.png

The TS508D is a four axis in one hybrid servo drive,which means it can separately drive for motors at the same time,and variable current control technology reduce the heating of hybrid servo drive and hybrid s servo motor,and hybrid servo drive size is small,which save space and freight cost.

Specifications

●Advanced 64bit DSP dual core technology

●Auto identification the parameters of hybrid servo motor after power up.

●Work smoothly, high torque output at medium/high speed; fast response ,and low heating ,low vibration.

● Opto - isolated differential control signal input,alarm signal OC output

●Adopt advanced variable current and variable frequency technology, it can reduce motor and drive heating and vibration.

●The max pulse frequency is 500KHZ,(the default is 200KHZ)

●The two motors can be controlled by one pulse command or two separately channels pulse command.

●The voltage of input pulse is 4.5vdc—28vdc, no need connect any resistor

●Micro-step setting range is 200~51200,and micro-step can set by serial port

●Over-voltage,under-voltage and over-current protection

Testing steps

1:connect motor to drive for motor ports (4 wires ,A+,A-,B+,B- must connect to drive correctly,4 pcs motor cables must be corresponding to motor1—motor4 )

2:connect encoder wiring to drive for encoder ports(6 wires,EA+,EA-,EB+,EB-,VCC, GND , must connect to drive correctly,4 pcs encoder cables must be corresponding to encoder1—encoder4)

3:connect power supply to drive (for this drive , the recommended power supply is 48VDC, select a suitable power for drive which depend on the motors power watt)

4:set the micro step and current for motors

5:connect controller for debugging


blob.pngblob.png

blob.pngblob.png


Contact Us

Shenzhen ECON Technology Co.,Ltd

Add: 2F, Building B, Jintai Industrial Park, Hangcheng Avenue, Gushu Village, Xixiang Street, Bao'an Area, Shenzhen, Guangdong, China

Tel: 0755-2331 9542

Fax: 0755-2331 9542

Tel: +86 136 2096 1024

Email: enquiry@hybridservo.com

       technical01@hybridservo.com

Copyright © Shenzhen ECON Technology Co.,Ltd