Shenzhen ECON Technology Co.,Ltd
call us on: +8613620961024

Nema23 Easy Servo Motor Integrated With Drive

Integrated closed loop stepper products,motor with drive,save space on machine,save cost too.This series is 2 phase nema23 closed loop stepper motor with drive,3 phase nema23 hybrid servo motor with drive

Product Details:

Product Specification: nema23 easy servo motor integrated with drive

●Operation voltageDC power supply input 15—50VDC,the recommended power supply is 36VDC

●The max continuous output current is 8.2A,peak current is 13A

●Support differential and single end pulse+direction command, support position/speed/torque control mode
● Adopt advanced magnetic oriented control technology(FOC) and space vector PWM control technology (SVPWM)
●Adopt advanced variable current and variable frequency technology, it can reduce motor and drive heating and vibration.

●The micro step(pulse/revolution) can be set by ProTuner or DIP switches, MAX 51200

● 0—5VDC analog input for speed mode, and support IO speed control function.(customized)

●Support over-voltage, under-voltage, over-current, over-error protections
●Single/dual pulse mode, pulse valid edge optional

●Support RS232 serial port, but need to use special USB cable to adjust
●Work smoothly, high torque output at medium/high speed; fast response ,and low heating ,low vibration.


Product Applications:nema23 easy servo motor integrated with drive

Successfully implemented IC57 integrated hybrid servo systems in various equipment, such as desktop CNC routers, small CNC mills, laser cutters / engravers, dental mills, electronic assembly & inspection equipment, labeling equipment, pick & place machines, X-Y tables


Product Technicial Parameters:nema23 easy servo motor integrated with drive

Drive Model And Selection Table

Drive Model

IC57-10

IC57-22

IC57-30

3IC57-10

3IC57-15

Holding Torque

 1.0Nm

2.2Nm

3.0Nm

1.0Nm

1.5Nm

Max Current

 6A

6A

6A

5.6A

5.6A

Drive control Program

Vector FOC control, quick start-stop   point PM control, power angle control

Step Angle/Motor Polar

1.8º/50 polar

 1.2º/50 polar

Recommend application

Medium-low speed stable, high speed big   torque, low heating, small vibration,anti-interference, good EMC effect

Voltage

15~50VDC,recommend 36V

Over-voltage protection value

68vdc±2

Control Mode

32bit DSP vector closed loop control   technology

Pulse MAX Frequency

500KHz(default is 200KHz)

Protection Function

Over-current, over-voltage,   under-voltage, over-error alarm

Input Signal

Pulse,direction,enable   differential/single-end connection signal, connection electric compatible   4.5~28vdc,no need to connect external limit current resistor

Output Signal

Alarm/place OC signal output, 100mA   output,need to connect pull-up resistor,MAX pull-up voltage 24Vdc

Position error control accuracy

±1 Pulse

Micro-step

Default 1600/rev, set micro-step by   ProTuner or DIP switches(200-51200)


Product Micro-Step Setting:nema23 easy servo motor integrated with drive

Pulse/REV Table

Pul/REV

SW1

SW2

SW3

SW4

Default

ON

ON

ON

ON

800

OFF

ON

ON

ON

1600

ON

OFF

ON

ON

3200

OFF

OFF

ON

ON

6400

ON

ON

OFF

ON

12800

OFF

ON

OFF

ON

25600

ON

OFF

OFF

ON

51200

OFF

OFF

OFF

ON

1000

ON

ON

ON

OFF

2000

OFF

ON

ON

OFF

4000

ON

OFF

ON

OFF

5000

OFF

OFF

ON

OFF

8000

ON

ON

OFF

OFF

10000

OFF

ON

OFF

OFF

20000

ON

OFF

OFF

OFF

40000

OFF

OFF

OFF

OFF

Micro-step(electric ratio):when SW1,SW2,SW3,SW4 is on,drive micro-step is drive internal default micro-step,the default value is 400PUL/REV, can set ratio by ProTuner software

 

SW5:Motor DIR,off=CCW,on=CW

SW6: Mode Selection,off=FOC,it is vector current variable close loop control mode,it is better for stable operation,big torque output,low heating requirements;

 

On=Lead,angle of lead closed loop control algorithm,this mode is better for quick start-stop occasion

Motor Selection

  

Product Dimension:nema23 easy servo motor integrated with drive

Drive Model

Motor Length(mm)

Drive Thickness(mm)

Integrated Motor Drive(mm)

IC57-10

56

30.2

86.2

IC57-22

84

30.2

114.2

IC57-30

115

30.2

145.2

3IC57-10

56

30.2

86.2

3IC57-15

76

30.2

106.2

blob.png




Product Warranty:nema23 easy servo motor integrated with drive

Shenzhen ECON Technology Co., Ltd. warrants its products against defects in materials and workmanship for a period of 12 months from shipment out of factory. During the warranty period, ECON technology will either, at its option, repair or replace products which proved to be defective.

Exclusions

The above warranty does not extend to any product damaged by reasons of improper or inadequate handling by customer, improper or inadequate customer wiring, unauthorized modification or misuse, or operation beyond the electrical specifications of the product and/or operation beyond environmental specifications for the product.

Obtaining Warranty Service

To obtain warranty service, a returned material authorization number (RMA) must be obtained from customer service at e-mail: technical01@hybridservo.com before returning product for service. Customer shall prepay shipping charges for products returned to ECON technology for warranty service, and ECON technology shall pay for return of products to customer.

Warranty Limitations

ECON technology makes no other warranty, either expressed or implied, with respect to the product. ECON technology specifically disclaims the implied warranties of merchantability and fitness for a particular purpose. Some jurisdictions do not allow limitations on how long and implied warranty lasts, so the above limitation or exclusion may not apply to you. However, any implied warranty of merchantability or fitness is limited to the 12-month duration of this written warranty.



Product Payment and  Delivery: nema23 easy servo motor integrated with drive

Our company apply for various payment way,like T/T,L/C;for some small buyers,we accept Paypal,Western Union. We can arrange express,air and sea shipment,we have professional team to deal with logistic.The terms we can do EXW,FOB,CFR,CIF,DDU and so on.


Equipped with professional Integrated Closed Loop Stepper Motor Drive factory, It is a leading nema23 easy servo motor integrated with drive manufacturer and supplier.
Hot Tags: nema23 easy servo motor integrated with drive, manufacturer, supplier, factory
Feedback
Contact Us

Shenzhen ECON Technology Co.,Ltd

Add: 2F, Building B, Jintai Industrial Park, Hangcheng Avenue, Gushu Village, Xixiang Street, Bao'an Area, Shenzhen, Guangdong, China

Tel: 0755-2331 9542

Fax: 0755-2331 9542

Tel: +86 136 2096 1024

Email: enquiry@hybridservo.com

       technical01@hybridservo.com

Copyright © Shenzhen ECON Technology Co.,Ltd